Basically, this problem is associated with an overclocked CPU and it has been reported to occur on recent Windows 10 versions. However, this does not mean that the error is limited to Windows 10 alone. There have also been complaints about the error appearing in older Windows OS versions, such as Windows 7 and 8.
According to the reports, the error appears randomly during the stress test. In certain cases, the error notification pops up two to three minutes after running Prime Others, though, experience this problem after the stress test has been running for several hours. What does this error mean? It could also occur due to incorrect RAM timings or speed. There are a lot of factors involved when doing a stress test, so you need to investigate thoroughly to get to the bottom of it. The good news is that this error can be easily fixed by tweaking some of the settings, unless the problem is caused by faulty hardware, such as bad RAM or CPU.
In order to fix this error successfully, you need to figure out which of these is the culprit and apply the necessary solution. There are other unknown factors that you should keep in mind when troubleshooting this error. Joined Feb 19, Messages 12, 2.
Yeah, this sounds like an overclocking issue. If you are overclocking, try decreasing your fsb or increasing vcore. If you're not overclocking, then you will want to test the memory as "live or die" suggested. Hey, shes all at stock atm i havent OC'ed in a long while havent had the time really. Everything in the case is clean as a whistle no dust build up and she runs cool, idles at c load 45 c on cpu.
Gpu doesn't go much above 50 c. Ill keep listing things i think you need to know, if u need any more info just ask Ill run memtest as soon as i finish posting. Thanks for the quick replys. Ok im trying to run memtest 86 and its saying it cant allocate mb of ram, ive tried running 2 instances of memtest because of the windows limitation and both instances give the same message, should i try removing a stick at a time to and test that way?
Thanks gam. Joined Mar 27, Messages 2, 0. Joined Jul 30, Messages 6, 1. Im unclear as to how the bootable version works it is floppy then boot from floppy? Does it run orthos stable at default clocks? So i decided to increase core voltage from 1,35 to 1, and it fixed the problem,but introduced the new one:it overheats. Temps reach 70C and then the protective routine shuts down CPU to cool it. My case is slim and the airflow is poor even with two aditional fans 8mm. Torture Test ran 2 minutes 13 seconds - 1 errors, 0 warnings.
Execution halted. This is how it looks like! The following user would like to thank ymboc for this post gos1. Post subject: Posted: Sun Apr 13, pm. If I remember correctly I didn't even get far enough to have the option of loading a driver I've already bought into the 45Watt be Post subject: Posted: Mon Apr 14, am.
I don't think I've changed anything in the bios I was referring to the post screen identifying the drives as IDE channels That said it would be worth repeating with just the sempron installed to confirm it wasn't the DVDRom Drive as you said.
When I do I'll also confirm that I haven't change the controller mode from the defaults.. Post subject: Posted: Mon Apr 14, pm. Besides the board is already out having work done on it:P I was under the same impresson from experience with NT You do not have the required permissions to view the files attached to this post.
Post subject: Posted: Wed Apr 16, am. Post subject: Posted: Fri Apr 18, pm. Last edited by ymboc on Fri Apr 18, pm, edited 1 time in total. Let me be the first to congratulate you.
0コメント